Aquarium light clip on reflectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy-to-print clip for a slicer primative plate to fit any compatible aqarium light to reflect those stray rays!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Maximize Your Aquarium Light with the Ultimate Reflector Clip!
Are you losing valuable light meant for your aquarium plants and fish? If your light fits the specs (7.5mm high with a 14.6mm top slot), then this is the perfect solution for you!
Why This Reflector Clip?
✔ Easy and quick to print
✔ No supports required
✔ Extra parts are just simple primitives in your slicing software
Recommended Print Settings:
- Material: PETG preferred, but PLA works fine if heat isn’t a concern. (Most aquarium lights stay cool, but avoid PLA if your setup gets warm.)
- Layer Height: Any—examples shown were printed at 0.24mm.
Upgrade your lighting efficiency with this simple yet powerful clip. Happy printing!
---------------------------------------------------------------
Instructions:
Download and Print Clips - as many as you need, I used three (3) a side on a 450mm light.
To print the flat reflector panels, merely:
1. New print in Orcaslicer
2. Right click on empty bed - select ADD PRIMATIVE → CUBE
3. With cube selected, select SCALE in top nav (or press S)
4. Turn off UNIFORM SCALE and adjust settings to whatever length (X) you need (I used 220 for mine as I used 2 for a 450mm light), Y is 28.4 and Z is 2