Humby Argent eye 6x9 Camera

The argent eye was my first attempt at creating a 3D printable camera back in February 2020 and has been somewhat obscured by the fact that I kept it on Github. 

Despite being my first camera, it is capable of taking most, if not all the accessories made for the Universal press as it features the same mounting surfaces as the press. This however means that using the camera requires you to use the proprietary Mamiya adapter plates(M or G adapters)

In short, this is a camera body designed for people who want a lightweight "MUP". 

if you're looking for a camera that doesn't need adapter plates, take a look at my super67

Best results with PETG at 0.2 layer height and 40% infill w/prusament profiles(on an MK3). works wonders with any PETG in my experience.(as seen in the pictures)

If you have any questions, feel free to drop into the filament and film discord, a discord that plays host to several camera designers, camera enthusiasts and printing enthusiasts. Use the channels under "Humby cameras" for feedback/help. Please read the rules. 

Discord link: https://discord.gg/z9eEHHkMjT

Updates:

• 29.03.22. Fixed a section of the cone that was poking out a few mm more than the surrounding mounting surface. No need to print a new cone if you've already printed one.