1 / 5
Rookery for Mosquito Hotend
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have adapted the rookery to fit a mosquito hotend that I had laying around.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have adapted the rookery to fit a mosquito hotend that I had laying around. I used a threaded bowden tube coupler on the top of the adapter since there is no bowden version of the mosquito that I'm aware of. Its shorter that the original rookery so you may gain a couple of millimeters in the Z.
Supports are required.
This is still a work in progress but I am printing successfully with it currently so I thought I'd share it and update it as I go. Please let me know if you have any suggestions for improvement.