1 / 2
Golf alignement stick
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your own alignement stick to practice your golf swing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I decided to make these alignment sticks to practice my golf swing instead of buying them.
They are really easy to print and require a very small amount of filament.
Print settings:
Quality: 0.16mm
Wall: 6
Infill: 15%
Support: Yes, for the end cap and connector if you print them upright.
You will need (for each stick):
- 4x Rods
- 3x Connectors
- 2x End caps
- Elastic cord (I used elastic sewing band, 3/8" width)
- Super glue
Instructions to make the sticks:
- Glue one connector to one end of a rod. Repeat this step 3 times.
- Make a large knot at one end of the elastic cord and thread it through all the rods.
- Make sure there is a significant amount of tension in the cord (it should be similar to the tension of a tent pole) before tying the knot at the other end.
- Finish by gluing one end cap on each end of the rods.