Gridfinity Oneblade Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bins for the Oneblade Pro (1x5x4), an additional blade, and the guard.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 645
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity bins for organizing a Oneblade Pro.
- Oneblade Pro and a single razor (1x5x4)
- an extra razor (1x1x4)
- the guard (2x1x4)
The specific model I've tested this with is QP6531, but will probably work with other Pro/360 models.
Print with your material of choice, no supports needed, don't use a brim unless you hate yourself.
Thanks to Zach Freedman, who introduced the world to Gridfinity, and then set it free for everyone to use. Zach Freedman's work is available on Thangs, and you can find examples of his Gridfinity designs here and here, which are available under his MIT license. If you like this model, or want to learn more about Gridfinity, you can check out Zach Freedman's YouTube, or you can support Zach Freedman's work on Patreon (patreon.com/zackfreedman).
Also, thanks to @Danol for the original travel case model (which I've also printed, and can recommend).