Tri-blade Karambit Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A karambit-style knife with 3 blades. Perfect for that inner mall ninja!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Usage
This can be used for anything that 3D printed knives usually are used for. The intended use is for waxplay during BDSM. The different knife profiles work for both pushing or pulling, and curved to contact as much skin as possible.
For safety reasons, this should only be used by a single person, as it can potentially penetrate skin. Sanitize after use with a method appropriate for your filament (e.g., isopropanol for PLA). Be aware: due to surface defects from 3D printing, microbes may still be present after sanitizing.
Print Instructions
Print with standard settings. Infill of 20% with 3 perimeters of PLA+ seems sufficient for strength. The handle will need to be mirrored and can be printed with either side upwards.
Assembly Instructions
The handles should snap in tightly to the knife, so additional glue is likely unnecessary.