1 / 4
310mm Build Plate Holders (for QiDi Plus4, CR-10, etc)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a build plate holder to hold up to 4 pcs of 310x310mm build plates.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 260
- Wydruki
- 4
- Wyświetlenia
- 859
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (1)Kolekcje (53)Powiązane
This build plate holder is designed to hold 4 pcs of 310mm build plates.
Dimensions:
Overall Length: 330mm
Main body width: 40mm
Overall width: 120mm
Overall height: 60mm
Print settings (I used PETG, but feel free to print with any filament that suits your needs):
- 0.2mm layer height
- 3 Walls
- 15-20% infill
- 5 top layers
- 5 bottom layers
I printed this on my QiDi Plus4 with diagonal orientation since it can only print 305x305mm maximum.