LONG Water Dragon! Articulated Print in Place!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Say hello to the long variation of the original print in place articulated water dragon!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Say hello to the long variation of the original print in place articulated water dragon! This longer and smoother design has a length of 43cm and is completely print in place! This dragon is perfect for fidgeting, displaying, or simply admiring its flowing form.
This design is fully print in place and works with Creality slicer’s default settings. For more detailed configurations, see below!
Layer Height: 0.1-0.2mm
Infill Density: 15%
Infill Pattern: Default slicer or experiment with other patterns!
Print Speed: 50–60 mm/s
Support Type: Non-Required!
Support Density: Non-Required!
Bed Temperature: 60°
Material: I have only used PLA so far!