FlyfishRC Volador VX3.5 Antenna and GPS mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact antenna and GPS mount for Volador VX3.5
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1236
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas.
Supports are required for the bottom of the mount, and there are modeled-in supports for the overhand where the GPS mounts.
I The GPS mount is sized to fit nano-sized GPS modules - the one that I used was the FlyFishRC nano M10.
The RX antennas mount on the bottom should work for almost any “T-Style” antenna.
STL, 3MF, and STEP files included. Feel free to tweak if you want.
