SK68 Flashlight Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for SK68 Flashlight
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I often had the need to take a closer look at a print, a nozzle or the tip of a filament.
To have enough light for an inspection I decided to place a flashlight at every printer I own.
A cheap but powerful flashlight is the SK68 which can be easily found on Ebay, Amazon and Aliexpress.
One problem remained: where should I to put it?
So I designed this simple mount that can be placed on almost any surface.
It can be attached to an aluminum-extrusion, a wooden shelf or a wall by using screws or a double-sided adhesive tape.
The need to attach it to a metal-door or a computer-case made me make a second design using 8x3mm magnets (use some glue).
The print can be done in PLA or PETG without any supports. I think ASA or ABS should not be a problem, but I didn't try it.