1 / 3
Temperature and Humidity Monitor to NodeRed Home Assistant via MQTT — zdjęcie 1
1 / 3

Temperature and Humidity Monitor to NodeRed Home Assistant via MQTT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Temp and Humidity monitor using WeMos D1 Mini NodeMcu and a temp/humidity probe to NodeRed and Home Assistant Via MQTT.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A project I've been working on for some time to monitor humidity and temperature via MQTT that I could feed into Node Red or Home assistant.  The 3d models are a bit of a work in progress but they are currently working well for me.  You'll need the following as this model was designed specifically for these parts.  

I'll attach example code in a file below, you'll need to add your WiFi info and your MQTT server info.  And update the location information for the MQTT sub, the example was for my sensor in my Garage.  So replace that with whatever you want yours to say.  Mine currently feeds to NodeRed and then into Home Assistant.  

Other notes due to the way the ventilation slats are in the base and trying to preserve the dimensions of slot for the board I recommend printing the base case upright with a few supports.  See my sliced file as an example.  

Let me know if you have any questions.  

Tagi