Prusa MMU2 Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix of Mr_Tantrum's Prusa MK3/MK3S Light Bar in order to accommodate for the MMU2
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 2121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple remix of Mr_Tantrum's Prusa MK3/MK3S Light Bar in order to accommodate for the MMU2
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Resolution: .2 or better
Infill: 15%
Filament: Pursament PETG Orange
Notes:
Remix of Mr_Tantrum's Prusa MK3/MK3S Light Bar
I liked the design and I used ulmeck's suggested light bar found here:
https://www.amazon.com/gp/product/B01MTPCUNP?creativeASIN=B01MTPCUNP&linkCode=w61&imprToken=uylvVIqauAAeHesyToiR8g&slotNum=0&tag=tv-auto-20
I also used Mr_Tantrum's suggested TechFlex to cover my wires found here:
https://www.amazon.com/gp/product/B00C5NS8Z4/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
Mr_Tantrum's design did not allow room for the MMU2 unit, so I lowered the bracket so that it would pass just underneath.
Original found here:
https://www.thingiverse.com/thing:3268910
Thanks for the original Mr_Tantrum, Support him here:
https://www.thingiverse.com/Mr\_Tantrum/about
Custom Section
Original designed bracket next to MMU2
New bracket with 24v light attached
Extruder cable will come in contact with the lens of the led fixture at max height, but because of the smooth cover of the light, it will not cause any print interference.
Same as previous picture, still no interference on movement but some contact.