Kia Sportage Body Mount Bushings and Lift Blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of body lift components we've made over the years for the 1993-2005 (1st generation) Kia Sportage…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a collection of body lift components we've made over the years for the 1993-2005 (1st generation) Kia Sportage vehicles. Popular lift heights are 1-3/8" and 3". The lower heights can typically be accomplished without needing to extend or modify the existing body mount studs. The taller lift heights will require the stud or bolt extensions. On the Sportage, there are studs fixed to the body that drop through the body mounts with nuts and washers below to hold everything in place.
Also included are best guesses at replacement body mount bushings. You may need to adjust the dimensions in the OpenSCAD files to match the factory bushings. If you do so, please post up a Make and let me know the dimensions you used so the files can be updated. The factory replacement bushings seem to be no longer available, part numbers in the included photo of the white bushings.
On the lower bushings, 2 options. First option is to 3D print the full bushing (KiaSportageLowerBodyMountBushing.scad). The second option is to cut rings of 2" OD x 1" ID polyurethane tubing: https://www.mcmaster.com/products/polyurethane-tubing/od~2/id~1/ and then 3D print or machine inserts (LowerBushingInsert.scad) to fill in the 1" ID hole down to the OD of the body mount stud. We've made a number of these "hybrid" lower bushings for folks who went with the generic Energy Suspension bushings for the uppers, information below:
The body lift blocks are typically machined out of 3-1/2" diameter UHMW polyethylene: https://amzn.to/4iuRqpd You could also use something like Nylon, Delrin or even aluminum. The lift blocks are somewhat complex, having an outer lip and recess that drops over the top of the upper body mount bushing similar to the cup on the underside of the body. Then, they have a stepped portion on the top to fit into that same cup on the body to hold everything in position. For ease of installation, it's common to slot at least the forward pair of blocks so that it's not require to raise the front of the body high enough to clear the front studs.
The bolt extensions are best machined on a lathe. We usually use 3/4"OD x 1/2"ID aluminum tubing: https://amzn.to/4c2FLvd Bore and tap the inside for M14x1.50 thread, then fit in a length of threaded rod: https://amzn.to/4c2FLvd into one end projecting the same length as the factory studs do. Then turn the OD down to 18mm to match the OD of the unthreaded portion of the factory studs. You can also use steel tubing, although 18mm OD is somewhat hard to find and punching M14 thread through 3" of steel tube is a lot of work!
You can also use the bolt extension file to make a shift lever extension. Just change the thread size to match that on the shift knob, usually M12x1.50 and size the tubing accordingly.
Installation notes:
Disclaimer: 3D print and use these parts at your own risk. These files just capture the basic dimensions of the various parts. Aside from the lower bushing insert, we've never used any 3D printed version of any of these parts. You might import the body lift block file into FreeCAD and then export it in a variety of CAD formats to send off to a machine shop to have that part made. Likewise, you could 3D print the bushings and then use those to make silicone molds and pour a set of polyurethane bushings if you wanted to go that route.
Photos: 3D printed upper/lower body mount bushings 3D printed body lift block, bottom side 3D printed body lift block, top side Sample of factory lower and upper body mount bushings Turned 1-3/8" body lift blocks in UHMW Turned 3" body lift blocks in UHMW with bolt extensions Machined polyurethane lower body mount bushings with 3D printed inserts
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
We've only 3D printed the lower bushing inserts (in ABS). It may be possible to 3D print full replacement bushings in TPU or other flexible filament, vary the infill and material for desired firmness. It may be possible to 3D print the lift blocks in something like a carbon-fiber / Nylon filament, YMMV.
Category: Automotive
