Pepe Le Pew - MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MMU version of Pepe Le Pew
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 365
- Wydruki
- 3
- Wyświetlenia
- 1127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MMU version of Pepe Le Pew
Pepe Le Pew, from the Warner Bros. Looney Tunes and Merrie Melodies series of cartoons introduced in 1945
The model, as presented is 80mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print.
Print instructions
I've included a Prusa Slicer 3MF file that I used for this print.
Individual STL parts are also included for other slicers.
Extra note: I used the PrusaSlicer .2mm speed defaults for my MK4S/MMU3, except for the following changes:
1 - I used organic supports and set the overhang parameter to 40deg to help support the tail
2- I then painted areas to prevent supports in areas that really were not needed
Be sure to check/set the purge amounts for the colors based on your filament brand. I was able to use the PrusaSlicer defaults without issue.