X-43A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flying semi scale model of Pegasus rocket booster with X-43A hypersonic vehicle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 975
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Flying semi scale model of Pegasus rocket booster with X-43A hypersonic vehicle.
Scale 1:25
The model is based on previously published Pegasus XL and uses the Pegasus model rocket printed parts.
https://www.printables.com/cs/model/12454-pegasus-xl
Length 570 mm, diameter 50 mm.
Powered by three 10 N-s model rocket motors (3x C6-5), altitude apogee circa 120 m.
The body tube is cardboard 50 mm diameter by Klima.
The design of the X-43A was inspired by the cardmodel HYPER X by T.Noteboom.
Print instructions
Category: Vehicles Print Settings
Printer: Rebel II
Rafts: No
Supports: No
Notes:
You need extra weight on the nose to make the model stable, so for the X-43A use enough infill.
I recommend to cut X-43A in half, print it in two pieces and bond.
Look into the Open Rocket design sheet for the stability calculations.
Not suitable for beginners.
How I Designed This
Construction tools used:
Solvespace V2.3 (elementary design),
Blender V2.78 (main object design),
3D Builder (.stl model fix),
Open Rocket (stability and fly simultaion)