1 / 3
Cableclip Kabelclip z. B. USB 4mm Kabel mit Fusion360 Modell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed it on my MK3S+. I use PETG for it and 30% infill. Remix because it is for 4mm cable and not for 10mm cable.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed it on my MK3S+. I use PETG for it and 30% infill.
Remix because it is for 4mm cable and not for 10mm cable.