Turn a Steba ED8 Dehydrator into a filament dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool support for a Steba ED8 to hold filament spools in place while drying.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The Steba ED8 works great as a filament dryer on its own. The discs have a detachable middle piece, which are wide enough for 1 kg filament spools.
This model is for holding the spools in-place while they are drying, as they can move around while the device is running.
There are two versions, a 148mm for two spools and a 74mm for a single spool.
I suggest printing in PETG or other material that can handle higher temperature without warping.
Assembling
1. Pick a disc for the bottom:
2. Attach the support to the disc:
3. Remove the middle part of the other discs:
4. Stack the discs as normal:
5. Done:
As most of my public models, the source code is available on my github repo: https://github.com/m-abs/openscad-models