HSW Sewing Thread Spool Holder (with Bobbin holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of "HSW Sewing Thread Spool Holder" with a bobbin holder.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the same instructions as the orginal. Look at the reference image how to layout the models on build plate. Be sure to block the support in the “red cubish area”. It is not necessary.
The HSW nuts are detachable, and need to be screwed in after printing. This makes printing a lot easier.
Copied from original:
A simple thread spool holder for the Honeycomb Storage Wall.
Print Settings:
Layer Height: .2mmNozzle: .4
Infill: 20%
Supports Needed
Print in the orientation that the STL is currently in.
You'll need to use an empty insert to connect into the wall.