Pool Ball Rack - 9 Ball or 8 Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pool Ball Rack for 9 Ball or 8 Ball
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 383
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my own creation, fully design in Fusion from scratch.
This project is prepared for work for 8 ball or 9 ball pool. Also, you can print this project im small bed printers.
The dovetails of the triangle have 0.1mm gap all around, for a realy snug fit (need 1 or 2 hammer kisses to fit right in), preventing the use of glue.
The inner triangle pieces have 0.4mm gap all around, sou you can insert or remove very easily by hand.
The balls inside the triangle have a little margin to play, to allow the removal of the triangle more easily.
This project was made for balls of 57.2mm with diameter.
Hope you like it and if you care about, Paypal.me a coffee!!!
https://paypal.me/brunoafgoncalves