Klein 14-in-1 and 11-in-1 covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers for both ends of the Klein Screwdrivers so you don't accidentally put a hole in a pocket or hand.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I found the original and it was a big hit at work so people asked for versions for different screwdriver models. Here we are.
This is for the Klein MAG 11-in-1 (32500MAG) as well as the Klein 14-in-1 (32314).
The main shaft can flip, but is asymmetrical, so different caps are needed for either end. Theoretically, adjusting the lengths of the sections in the parameterized file as well as the diameters could get it working for any model.
Mid diameter is the critical dimension for holding onto the shaft. Big Diameter needs sufficient clearance.
Let me know if you need my clearance values.
