Hevort ZR 2.6 12mm Lead Screw Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of the Hevort's Z axis system. Uses a 12mm lead screws instead of ball screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of the Hevort's 2.6ZR axis. It uses 12mm lead screws instead of ball screws. I've been running it for 6+ months now with no problems and I think it's a viable alternative to the ball screw version. The build is very similar except it requires some slightly different parts.
- For the motor mount you'll need 3x 5201-2RS Angular Contact Ball Bearing 12x32x15.9mm, instead of the 5200-2RS Bearings, 3x 12mm ID clamping shaft collars instead of the 10mm ID ones, and 3x D25 L30 5x12 Couplers instead of the D20 L25 ones.
- For the top of the lead screw mount you'll need 3x F6001ZZ Flanged Ball Bearing 12x28x8mm instead of the Ball Bearing 608RS.
- For the lead screw nut you'll need 12x(4x per a nut) M4 inserts, also available from CNC Kitchen. The nuts themselves need to conform to these dimensions. When Installing the heat set inserts I placed the part on the nut to keep the inner wall from deforming.
And of course you'll need 3x 12mm lead screws, length at your discretion. I'm using two from Misumi and one from Zyltech, because that's what I had from previous builds. I do notice when homing the wobble rings move noticeably more on the Zyltech lead screw than the Misumi ones.
Other than that the BOM is completely the same as the normal ZR2.6 as I was able to keep everything aligned with the ball screw version. I've left a bit of clearance on the parts so if you find something is loose let me know and I can upload some with tighter tolerances, everything printed nice and tight for me. You'll want to follow the official Hevort print guide for wall number, and material choices.