Mac Mini (2018) Underware Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount for your 2018 Mac Mini to go under your desk as part of the Underware system.
.2mm layer height, 15% infill, 3 wall loops, supports required. Printed example in PLA.
You can use the plastic bolts from HERE to mount it to the Underware system, which is what I am doing (use the 15mm long ones). You'll need 12 of them (recommend print extras in case you torque the end off one). Tighten them just to the point of being tight. Once you get 2 opposite corners in, you should be able to let go and continue inserting the remaining. It says the bolts are 11mm wide, but printed on my Bambu X1 with great tolerances, I still needed to use a 12mm socket to fit on them.