1 / 1
Toothed Idlers for Lemontron
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adopts toothed idler pulleys for Lemontron.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These toothed idlers actually did absolutely noting. The test benchy came out completely indistinguishable from the non-toothed idlers. The non-toothed flanged bearing is also much stronger, 100% metal, is able to take more torque, and is heat resistant. I don't recommend anyone actually uses these, but I put a lot of thought and care into the design, so here they are for you to experiment.
- Press fit 683 bearings into the body.
- Where these are used, the adjacent shim must be the small shim instead of medium shim
- Instead of 16mm screws for the bearing tower, use 14mm screws.
- Instead of 12mm screws for the tensioner, use 10mm screws.