1 / 2
Door holder stop for holding the door 90°-145° open
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adding to my original design with a version which holds and stops the door at 90°-145° depending on placement.
- Ocena
- 3 / 5
- Polubienia
- 46
- Pobrania
- 220
- Wydruki
- 2
- Wyświetlenia
- 1425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (59)Powiązane
I needed a door stop/holder for a door which needs to be hold up at ~110° so I made another “Ball”-part to fit this purpose.
Recommended to use screws to secure this part to the wall, double sided adhesive tape is likely not sufficient.
The arm is designed with a incline to reduce torque and weaker to dampen the stop somewhat, seems to work fine, the arm flexes without ripping the screws out.
Works with the “catcher” and “cover”-parts. See the original publish for these models.