1 / 2
Spring & Pin Storage for Stovall Products F990 Max Grip Exerciser — zdjęcie 1
1 / 2

Spring & Pin Storage for Stovall Products F990 Max Grip Exerciser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The title grip exerciser comes with several springs and pins (+ cotter pins), not all of which are used at the same…

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The title grip exerciser comes with several springs and pins (+ cotter pins), not all of which are used at the same time. I was afraid of them getting separated or lost, so made this little device to hold any springs and pins not currently being used in the exerciser. The thing provided in the .stl file is a little more compact than the one shown in the picture. If you don't want all five spring posts or both pin posts, you can cut them off in a slicer or physically. This is an oddly specific thing that I expect no one else will ever use...

Print Settings

Supports:

No

Infill:

I used 15%.

Notes:

I used PETG for strength and flexibility, but anything should work.

Post-Printing

The sliding gate fits as printed from my printer, but the tolerances are tight: you might have to sharpen, snip, or sand some of it down to make it fit. Or if it prints too large, you can scale it it your slicer. It only weighs about 1.5g.

Category: Household

Tagi