AB1 Colorful insert game for kids with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,19 € – 1,46 € netto (bez VAT)
Dla pliku: ig-03_0.4n_0.3mm_PLA_MK4IS_52m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,32 € netto (środek widełek).
- Masa podana przez autora
- 26 g
- Czas druku podany przez autora
- 52,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 200
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet. Make sure you glue down the magnets (6x2mm) so they cannot detach. Just use regular wood screws to attach it to wooden base and add a rope into each shape.
Printing: 3 walls, 6 top, 6 bottom, 15% infill, no supports. It is divided into four groups. For the best result print each group different colour.
Check out my other models in this series: https://www.printables.com/@Bobino/models

