Earring Heart Giftbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Giftbox for jewelry
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey guys,
just desgined this for my girlfriend.
There are two different versions of the EarringBoxBottom. One of them has a small hole that is going through, so you can attach the earrings to it. The other one has a hole that is not going through the entire way. You can see this in detail in the 3D viewer.
For assembling you just need a small piece of 1,75mm filament.
If there's need for a verision without any holes just write a comment or dm me.
My print settings:
* 0.4 mm nozzle
* 0.2 mm layer height
* 3 walls
* 10% infill
* supports: For the EarringBoxBottomWithHole.stl you should add some support under the hole. (might work without idk)
Happy printing