Nan-e nokhodchi Chickpea Cookie cutter mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified clover leaf cookie cutter for making Nan-e nokhodchi, a Persian chickpea flour cookie.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple model for a 1¼-inch / 32mm cookiecutter / mold in a traditional shape for the ancient nan-e nokhodchi, a lightly sweet, sandy, and delicate chickpea flour cookie, especially popular to make for the Persian new year. It generally contains sugar, oil/ghee, cardamom, and rose water, topped with a pistashio piece or saffron. The model is 1 inch / 25.4 mm high, a bit taller than the recommended cookie height of ¾-inch / 20mm.
Printed with 0.3mm layers, 2 perimieters, 3 bottom/top layers, 20% infill.
I recommend clear/plain PETG for sturdiness and relative safety (YMMV). The cutting walls are about 0.57mm thick, which is one thick wall using Arachne perimeter generation with a 0.4mm nozzle.
With single wall PETG you will want to have aligned seams and to avoid gaps may have to turn off retractions on layer change, found in prusaslicer with the printer extruder setting page or the filament overrides page in filament settings.
Reasonable recipes are easy to find. You may have to roast your own chickpea flour. Links on request.