AB6 Drop it game for kids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This activity board accessory simply amazes by dropping plastic puck and hitting obstacles. Kids love to do it on repeat
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution
This is an easy print that fits on regular printers in one piece. Just print the colourful pucks, the base and glue some acrylic on top.
Printing:
You do not need supports. The base is thin on purpose to save filament. The acrylic piece will make it rigid.
Notes:
Be careful when drilling and cutting acrylic, it is really prone to shattering. And do not tighten the screw on the acrylic, rather drill bigger hole to fit the screw head and tighten it to the 3D printed part.
I used UHU glue but any contact adhesive should work. Do not use super glue because it will make the acrylic cloudy.
Check out my other models in this series: https://www.printables.com/@Bobino/models
