Slider Tracker for Pet feeding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep track of whether your pets have been fed with this sliding tracker!
- Ocena
- 4,5 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 549
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Keep track of whether you have fed your little creatures buy rotating the wheel to match the current day and using the sliders to indicate whether they have been fed yet or not.
Included in the model files is a Blank Top .stl that you are most welcome to edit to your specific needs, or even print it out blank and write/label it with sticky labels.
OnShape: https://cad.onshape.com/documents/b800f43940fc790706ba7961/w/d473cfdafedd031a24d4c80d/e/4997b1f522b46c7d206eecd7?renderMode=0&uiState=67e75e18d08c403ddc0b2af1
Everything fits in place and top and bottom plates snap together, however for a more secure fit, I would recommend using a tiny bit of super glue where they snap together.
I had to add colour to mine in post processing because I didn't have the right filament on hand, however if you do, you should be able to pause the print between the layers (for the wheel and top plate) and change the filament and continue printing.
Recommended settings
Layer Height: 0.2mm
*Note: Top/bottom slider and insert are the same model, but are individually included for clarity.