20x20 TSlot Locking Extrusion Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These covers are designed to lock in place with a twist of the lock, they are easy to install and remove.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
No supports necessary, the support for the male end is already included. Print at a .2mm layer height. I printed mine with ABS, so they will not warp in my enclosed chamber.
I recommend printing the 50mm first and test the locking mechanism.
If you printer is tuned, then it is really easy to free the lock. I normally just push with the flat blade screwdriver in the slot to free the lock (do not apply too much pressure). You can also slide a blade to free the flat part of the lock if needed. Hopefully you find this useful.