Fractal Design Ridge LCD Case Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add an 8.8" LCD to the front of your Fractal Design Ridge.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 4470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
As seen on Craft Computing. I designed a bezel and mount for an 8.8" LCD Panel for the front of a Fractal Design Ridge ITX case. The model is a 2-part print, sized for sub-25mm printers. The lower panel has the Craft Computing Logo, as well as a backer plate to glue inside for color or transparency. I also included a blank panel for creating your own design.
Screw holes are included for mounting, and you'll need (4x) m2 x 10mm screws.
The 8.8-inch LCD is available on Amazon or AliExpress
https://amzn.to/4iM63V3
https://s.click.aliexpress.com/e/_okTZrqN
Check out the build video here: