Convoy Flashlight Focus Kits (3030, 3535, 4040, 5050)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom rotating two piece gasket kit. 0.9mm - 1.5mm shelf thickness
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
3030, 3535, 4040, 5050 Gasket Kits for Convoy flashlights with a 9mm reflector hole. From the left, the first centre piece suits 0.9 & 1.0mm outer pieces, the second centre piece fits 1.0 - 1.5mm outer pieces.
From the left: 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm shelf thickness.
The centre of the gasket remains fixed in place while the outer piece rotates with the reflector. This allows for perfect centring of the leds and prevents risk of tearing the led off the mcpcb.
PLA isn't recommended because it starts to soften at 50°C. PETG is better suited at 70°C. Only print in light colours to avoid the led light being absorbed and heating up. Black will start smoking within seconds.
Supports maybe needed.
Note: the screws on the mcpcb need to be left slightly loose for perfect centring. There's enough downward pressure from the reflector, so it's fine.