1 / 2
Glass Big Mouth Bubbler lid fix — zdjęcie 1
1 / 2

Glass Big Mouth Bubbler lid fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For 6 gallon glass big mouth bubbler. The lid fits inside the glass but pops up very easily. This holds it down.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

For the glass 6 gallon big mouth bubbler fermenter. The lid that came with it has a rubber gasket that doesn't grip well and slides, especially when wet. I used to tape it down or put bricks on it. Then I got a printer and designed this. 

The ring goes on first, before the lid. You might have to scale down by about 1-2% as my current one sometimes pops over the glass threading. (which is when I use the wedge seen in the photo). 

The straps then fit after the lid. The system has worked well for several brews, even with very vigorous fermentation (such as in the photo).

Public CAD file on onshape “BigMouth - mark5”

Material: PETG worked well, PLA should as well. Needs some flex in straps.

Resolution: 0.2mm

Supports really only needed for the strap

Tagi