Positron 3D Service Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds every tool and consumable (except for filament) that is required to run or service a Positron V3.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This contains every tool and consumable (except for filament, of course) that is required to run or service a Positron V3 3D Printer.
Because it is an upside-down printer, when extruding filament (during filament load or filament swaps) it can get messy. The paper towel rectangles have a hole (1-hole punch) for the nozzle, which and I push in place using the wrench, to form a kind of dam (like how a dentist dams a tooth). Then the extruded filament lands on the paper towel - often it does not stick to the paper so I can just pick it up with the forceps and toss it into recycling.
- The 3mL spray bottles can be found on AliExpress.
- The wrench is a "V6 Mini Spanner M2 M2.5 M3 M4" found on AliExpress, with the M2 section ground off.
- After changing every fastener on the Positron to Hex/Allen, the 3 Allen keys service everything except the bearings for the rail sliders.
- The Stanley razor blade scraper has a plastic scraper blade found on AliExpress.
- Hollow Plunger for 3mL Syringe
Much thanks to Dirk Heisswolf for CaseBuilderLib - because it gives complete freedom in how to make a wonderful case that has print-in-place hinges and latches and lettering. It's wonderful!
Built with OpenSCAD.