Yaesu FTM-300D stand for your bench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Legs for your FTM-300D. Now it stands on your bench, and you see your display at the right angle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I was tired of my FTM-300D sitting flat on my bench. I kept bending over to see the entire display. So, I looked around on the Internet, thinking I could find and print something. I couldn't find anything, so I took to Fusion 360, and here's what I came up with. One print considers the release tab on one side of the mounting bracket. The other print is for the other side. I used the self tapping screws that came with the radio. I hope this helps, and I'm interested in any comments / improvements / rants / raves.
73
Dave, KØTOC