NO TESLA Logo Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "NO" symbol for the tesla logo on a Model 3 or Model Y
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I know that this model will be controversial but hopefully someone will appreciate it. Best printed in flex to conform to the contours of the car.
The orange ones shown in the photo already installed was a test in PLA that I had to heat to get to fit and slightly larger than the uploaded model. I should add that the on car image also has blackout covers on the original logos. That part is not included in the model.
The model has a small bevel on the back to create space for double stick tape. You may want to shave that off in your slicer depening on the tape you use.
Question >>> Can I sell these?
Answer >>>> Knock yourself out!