1 / 1
GEPRC Cinelog 30 v3 GPS Mount for 121 GPS (12mm) Cinelog30 Cinelog30v3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for GPS on Cinelog30 v3.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 620
- Wydruki
- 0
- Wyświetlenia
- 2703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (25)Powiązane
I used canopy model from GrabCad and tinkered simple mount for GPS.
I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed with TPU.
Print with supports.