Arrma Kraton 6S V6 - Wing Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in replacement for the wing mount, as a single part or two separate parts.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 569
- Wydruki
- 1
- Wyświetlenia
- 2136
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.
A clone of the new wing mount on the Kraton 6S V6. This fits all Kraton 6S vehicles in the new lineup, including the EXB.
2-piece mount: print with 4 walls, 3 top/bottom, and 15% grid infill. 15% seems low but you want a good amount of flex. Print the brace with higher infill but everything else can stay the same.
1-piece mount: print with the flat side down with some tough 95A TPU. Supports are needed for the middle part nearest to the bottom, and the two pieces obtruding where they meet the center brace.
The two-piece option can be printed face-down with same settings, and no supports.