Ender 3 Neo Series 5015 Fan Mount (remix - different fan fixing system)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original model with different fan fixing system
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Use one model or the other depending on you fan
It is possible to check the fitting of the 5015 fan by printing the test parts:
- Duct-test-org.stl for the original model
- Duct-test-enlarged.stl for the enlarged model
Additional info regarding the fan powering : since the 5015 has more blowing
power, fan speed needs to be adjusted
This is possible under the slicer
I preferred another option: using a buck converter to reduce the voltage from
24V down to 10V. By connecting things as in the third picture, PWM speed
control still works correctly
My advices:
- Preferably use a buck converter with voltage display
- 5015 fan: I used a Sunon Maglev 24V, which accepts PWM control even when
powered at 10V (currently using it at 12V). Not completely silent, but far more silent than the original 4010
Thank to the designer for sharing this part
NB:
The 4020 mounting system comes from:
https://www.printables.com/model/1247653-ender-3-v2-neo-ez-fan-mount-remix-of-a-remix-of-a
Its fan guard comes from:
https://www.thingiverse.com/thing:2505568
(sorry, original model not published on printables)
