Creality Sermoon D1 Runout Sensor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the runout sensor when running with no cover on the spool mount side and helps with tube management.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The printer didn't come with a lid, so why leave all those other covers and doors on it? It sure is a lot easier to get to stuff, and it seems to enjoy the fresh air to be honest.
Printed in generic PLA with standard settings, upright, no supports, 10% or 15% infill of your choice. I did 5 wall loops because the threads for the 6mm straight-thread air fittings are printed. They come out a little chubby so chase them with a 6mm tap and don't overtighten. You could add a drop of super glue to the threads but I didn't.
Attached with the stock fasteners that came with the machine.