The Tape Roller Plus/Walkman/Tapeplayer beltclip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
beltclip/holder for the Taperoller Plus from Dirttapes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
This is a sorta Beltclip/case for those new Casette players that are still made today.
This is designed specifically for the Taperoller plus from Dirttapes, I have the old MiniUSB version, feel free to tell me if it doesnt fit the USB-C version for some reason.
It might fit some of the other generic Tape players but who knows.
I made it to work with 1,75mm filament as a pin for the clip movement, I also made the hole to fit a potential spring extra wide to be safe it will fit as many springs as possible.
The clip has a cutout for a small torsion spring from Aliexpress or other stores that sell them for cheap
I very much recommend you print this thing in PETG as the slight flexibility will work better for the retainers ontop and since its less brittle than e.g. PLA, ideal would be a material like Nylon for obvious reasons
This is the first revision, so be careful, any tips for improvements I will try to add later down the line.
Feel free to remix to adjust for other tape players, or to make your own designs/improvements.