Venom Pro Muzzle Extension (With BCAR option)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the stellar Venom Pro muzzle extension to add a BCAR option.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the printing instructions for the original model, with one exception - print at .16 layer height or .12 layer height for the threading.
Use it with the hardware free BCAR located HERE. Or use one of these alternate tips in lieu of a BCAR located HERE; tips are compatible with both ID versions. Any Rev 2 EX-compatible BCAR should work with this as well, though I would not recommend putting a smaller ID BCAR on the 16mm version.
There are 16 and 13.5mm ID versions; be sure to print the threaded coupler that matches the version with the ID of your choice. I like the 13.5mm because it has the best all around performance with BCARs in my observation, but YMMV.
Update 3/29/2025: Added a couple newer versions of the battery door that use less material to save on weight and filament. These will also be compatible with the BCAR-free muzzle extender.
Update 4/13/2025: I was testing with an earlier version of the holster, apparently, and this muzzle extender is not currently compatible with the latest version of the VP holster. It'll be a couple of days before I can fix that, but I wanted to highlight it now so no one else prints it expecting a fit. I should have it up in going in about a week. This file won't change, I'll simply add a new holster variant.
Enjoy!