Ryobi Trim Router Edge Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edge guide for Ryobi PCL424
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Edge guide attachment for Ryobi PCL424 Trim Router. It allows several inches of adjustment and has ¼" marks along the bottom to help measure and ensure staying square.
Needed:
M5 x 20mm bolts QTY: 2 (for thumb screws to hold on edge guide)
M5 x 16mm bolts QTY: 1 (for holding on handle)
M5 heated inserts QTY: 3 (2 installed in edge guide, 1 installed in handle)
Print:
Base plate with numbers along the build plate
Two thumb screws
Edge guide
Handle (I printed it laying down so layer lines add strength)
Edit: I have replaced the .stl file for the edge guide with one that has the correct holes for the M5 insert. The original included one was skewed from making it wider in V2, I did not properly account for the mounting holes. This has been corrected now.