1 / 1
Fat man atomic bomb bead, parametric — zdjęcie 1

Fat man atomic bomb bead, parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hoodie bead of the fat man atomic bomb. Download with 4, 6 or 8 mm diameter hole, or adjust parametric Onshape document

Ocena
5 / 5
Polubienia
43
Pobrania
108
Wydruki
1
Wyświetlenia
307
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This isn't the kind of thing I would usually make, but I've been enjoying the bead flash contest and felt this was missing. Available for download in 4, 6, and 8 mm diameter hole diameter, or you could use this parametric Onshape model to adjust to your specification. I printed at 0.16 mm layer height in PLA. On the smallest beads, the arachne wall generator is necessary or the slicer may not generate all the thin walls at the base of the print. I also recommend using arachne for the largest bead because it tends to work out better for me on parts with thin walls in general.

Tagi