HSW Bar For Hanging Stuff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a Bar for hanging cleaners couldnt find a model So Created This. Can be used to Hang whatever You can Think Of
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
479mm long rod/bar To be used With Honeycomb storage wall.
Sure you could Make Bar Shorter or longer Just stretch on the x axis.
.20 layers.
3 walls.
15%+ infill.
Screw might need to be worked in a little bit (just screw in an out couple times with a pair of pliers and then will be able to use just hand)
No supports required if printed As shown in the .3mf
No supports required if Printed as shown in the screen shot of the slicer
Included .stls for the models.
and also Included the whole plate if you wanna print in one go.