Miata NA/NB Clutch Pedal Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pedal extender for older model miatas that fits onto the clutch pedal, and I believe on the brake pedal as…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
This is a pedal extender for older model miatas that fits onto the clutch pedal, and I believe on the brake pedal as well. It brings it a bit closer to your foot, only about 20MM, but the difference in noticable when it's on the car.
Print 2 parts, one mirrored to the other, and clamp them together on the pedal using a couple of nuts and bolts. It's designed so that even without bolts it's a snug fit on the pedal, so getting it on might be a challenge.
Be aware that PLA isn't the best material to use for an application like this, it might get too soft during the summer.
Please be careful printing and using any plastic parts on your car, especially for mission critical operations like a clutch pedal.
Category: Other