1 / 6
Hilti VC 10-22 water leakage suction pad — zdjęcie 1
1 / 6

Hilti VC 10-22 water leakage suction pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool for when a water leakage occurred and water keeps on flowing from underneath an unreachable space.

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sometimes I encounter a water leakage. Water flows wherever it wants to go. On some cases water gets beneath unreachable place. When removing the water from the ground in front of such an unreachable space, the water just keeps flowing. To make it more easy to suck up all the appearing water without too much effort, I designed this accessory which can be placed where the water keeps flowing to.

This pad has small bumps on the bottom. The bumps rest on the floor leaving air/space between floor and pad. So the air can flow underneath the pad, sucking water towards the center where the vacuum hose is attached.

This set has 2 different pieces between pad and vacuum hose. One is strait, one is at a 90 degree angle

I deliberately did not make the connection exactly the way it should to fit the Hilti hose. I want the hose to be as flexible as possible, so that's why I designed it like this.

 

The 2 pieces between hose and pad are connected with 15x3 neodymium magnets.

Each part has 10 of these magnets printed inside. So in total 3 pieces x 10 magnets = 30 magnets needed in total

Tagi