Charging Dock for LedLenser USB Type A Dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tabletop charging dock for the LedLenser USB Type A donge for flashlights up to 30mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This adapter keeps the USB type A Dongle from LedLenser standing steady on the table, turning it into a convenient charging dock. Confirmed working with the P5R Core and P7R Core, but should work with diameters up to 30mm. Let me know if you've tested it with different models.
The model comes in two variants:
nohex, which is just a plain old 3D model
hex, which has internal slots for 4 M6 nuts (ISO 4032) to weigh down the model and keep it sitting on the table. When slicing you'll need to insert a pause before the top layer is printed over the cavities, then insert the nuts and resume the print. You can also use the provided G-Code, it has the pause already in it.
I've also included the STEP file, if you want to modify this model into something else, like a wall mount etc.