Sam Loyd's Yankee Cartridge Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free the coin from the box. Modeled after an 1871 patent by the famous puzzle designer Sam Loyd.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Sam Loyd's Yankee Cartridge Box. It was patented in 1871. The goal is to free the penny that's inside.
This is a slight variation because I think there is an error in the diagram, but it still keeps with the spirt of the puzzle.
You'll also need a 6 mm steel ball. I ordered some off Amazon that work fine.
To assemble:
Stack the 3 plates on top of each other like in the picture, so that the square hole is aligned across all plates. Place the steel ball in the square hole of the first two plates before adding the third plate. For the middle plate, make sure the recessed circle is pointing down. After placing on the 3 plates, add the cap to the top. I added a drop of Gorilla glue before putting on the cap to make sure it stays securely in place.
To Reset Coin into Puzzle:
Align circles so that you can see all the way to the bottom. Turn the box over and rotate the lid a penny's length. Turn the box over upright, and keep turning in the same direction until you see a new circle recess. Place the penny flat in this recess, and continue rotating the lid a full turn.